Captive Portal
      Back to home
      1. Help Center
      2. Access Point Instructions
      3. Captive Portal

      Cisco Meraki

      Access Point Instructions for Cisco Meraki

      This page explains the configuration of Cisco Meraki wireless access points for external Captive Portal and RADIUS server authentication.

      IronWiFi Console Configuration

      1. Log into the IronWiFi console or register for free
      2. Create a new network
      3. After that, create a new captive portal, with vendor Cisco Meraki

      Access Point Configuration

      Sign-in to the Meraki cloud portal.

      1. Navigate to Wireless -> Configure -> SSIDs and define a network that we will protect with a Captive Portal with RADIUS authentication. Click edit settings next to Access Control. Configure Access Control with:
      • Association requirements - Open (no encryption)
      • Splash page - Sign-on with my RADIUS server

      RADIUS for splash page

      • 1. Host - get this value from the IronWiFi console
      • 1. Port - get this value from the IronWiFi console
      • 1. Secret - get this value from the IronWiFi console
      • 2. Host - get this value from the IronWiFi console
      • 2. Port - get this value from the IronWiFi console
      • 2. Secret - get this value from the IronWiFi console
      • Failover policy - Deny access
      • Load balancing policy - Strict priority order
      • Network access control - Disabled
      • Assign group policies by device type - Disabled
      • Walled Garden - Walled Garden is enabled
      • Walled Garden Ranges - 107.178.250.42/32

      RADIUS accounting - If you don't see RADIUS Accounting servers, contact Meraki support to enable this feature in your account.

      • RADIUS accounting - enabled
      • 1. Host - get this value from the IronWiFi console
      • 1. Port - get this value from the IronWiFi console
      • 1. Secret - get this value from the IronWiFi console
      • 2. Host -get this value from the IronWiFi console
      • 2. Port -get this value from the IronWiFi console
      • 2. Secret -get this value from the IronWiFi console
      • Data-Carrier Detect - enabled
      1. Navigate to Wireless -> Configure -> Splash page and configure:
      • Custom Splash URL -get this value from the IronWiFi console

      If data-carrier detect is enabled, sessions will be revoked and accounted for whenever a client disassociates from a network. To allow clients to reassociate to the network without re-authorization, do not enable data-carrier detect.

      If you have devices that don't have support for two way authentication like printers, Smart TV, etc., you can white-list these devices directly in the Meraki Console -

      https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Blocking_and_Whitelisting_Clients